MLG Enterprises Construction Builders Division

Design - Built And Construct - Renovation Works
Engineers • Architects • Electrical• Mechanical •
Surveyor

                                   TILE PREMIUM

PRODUCT INFORMATION:

Available Thickness : 0.4, 0.5, 0.6mm Aluminum Zinc coating : AZ 70g / m2

Color Coating : Oven baked epoxy primer with high grade Polyester top and back coats

Standard coat: Top - 16-20 microns Bottom - 6-10 microns

Yield Strength : 275 MPA and 550 MPA Recommended Minimum roof slope : 15 degrees

Purlin Distance : Must be equal to the module distance

Length : Any transportable length (site roll forming can be arranged)

Application : Roofing 

 

                                      TILE CLASSIC

 PRODUCT INFORMATION:

Available Thickness : 0.4, 0.5, 0.6mm Aluminum Zinc coating : AZ 70g / m2

Color Coating : Oven baked epoxy primer with high grade Polyester top and back coats

Standard coat: Top - 16-20 microns Bottom - 6-10 microns

Yield Strength : 275 MPA and 550 MPA Recommended Minimum roof slope : 15 degrees

Purlin Distance : Must be equal to the module distance

Length : Any transportable length (site roll forming can be arranged)

Application : Roofing

                                         CORR

 

  

 

PRODUCT INFORMATION:

Application: Roofing, walling and undersheeting

 

      E.C.         	            1 ½ Lapping = 0.725m 		  
                                    2 ½ Lapping = 0.690m 		   
                                    2 ½ Lapping = 0.645m 
Nominal Width  : 1.100 mm 
Effective Width : 1.040 mm 

 

                                   CURVE CORR

 

PRODUCT INFORMATION

  • Roof frames must be well anchored
  • Purlins must be straight, level and parallel to each other
  • Gutters must be installed prior to the laying of the roof panels

    Available Thickness : 0.4 to 0.5, 0.6 mm

Aluminum Zinc Coating : Az70

Color Coating : Oven-baked epoxy primer with high grade polyester       

top and back coats

Standard Coat : Top -16 - 20 microns

                          : Bottom - 6 -10 microns

Yield Strength : 275 MPA and 550 MPA

Application : Roofing 

                                   CURVE RIB

PRODUCT INFORMATION

  • Roof frames must be well anchored
  • Purlins must be straight, level and parallel to each other
  • Gutters must be installed prior to the laying of the roof panels

    Purling Spacing Length : 0.4 to 0.5 meters

    Length : Maximum of 14 meters (site roll forming can be arranged)

    Application : Roofing

 

                                          RIB 3

 

 

 PRODUCT INFORMATION:

Available Thickness : 0.3, 0.4, 0.5, 0.6mm 

Aluminum Zinc Coating : AZ70 

Color Coating : Oven-baked epoxy primer with high grade polyester top and back coats

Standard coats: Top -16-20 microns Bottoms -6-10 microns 

Yield of Strength : 275 MPA and 550 MPA 

Length : Any transportable length (site roll forming can be arranged) 

 

Application	: Roofing and Walling                 
-High tensile steel that provides greater structural rigidity and better load bearing capability.                                 
-Also available with laminated 2mm insulation foam to keep heat and sound out.          
-Time-tested, factory applied paint system over zinc or zinc-aluminum coated steel that ensures 
durability and extended service life.         
-Ideal for residential and industrial applications as roofing, siding, cladding, etc.         
-Fast and easy installation.   
 
Nominal Width          : 804 mm  
Effective Coverage    : 755 mm 

 

 

 

                                        RIB 4

 

 PRODUCT INFORMATION:

Available Thickness : 0.3, 0.4, 0.5, 0.6mm 

Aluminum Zinc Coating : AZ70 

Color Coating : Oven-baked epoxy primer with high grade polyester top and back coats

Standard coats: Top -16-20 microns Bottoms -6-10 microns 

Yield of Strength : 275 MPA and 550 MPA 

Length : Any transportable length (site roll forming can be arranged) 

 

Application	: Roofing and Walling                   
-High tensile steel that provides greater structural rigidity and better load bearing capability.         
-Also available with laminated 2mm insulation foam to keep heat and sound out.        
 -Time-tested, factory applied paint system over zinc or zinc-aluminum coated steel that ensures 
durability and extended service life.         
-Ideal for residential and industrial applications as roofing, siding, cladding, etc.         
-Fast and easy installation.  
 
Nominal Width      : 1000mm 

Effective Coverage : 1040mm  

 

                                      SPANDREL

 

Geometrically Elegant Absolutely Durable

  • Practical and durable substitute for wooden wall and ceiling panels, fascia, cladding, etc.
  • Pre-painted zinc or zinc-aluminum coated steel that ensures excellent resistance against damages due to rust, organic rotting and pest.
  • Fast and easy installation.
  • Economical.

PRODUCT INFORMATION

Available Thickness 0.3, 0.4, 0.5, 0.6mm

Aluminum Zinc Coating AZ70

Color Coating Oven-baked epoxy primer with high grade polyester top and back coats

Standard coat Top- 16-20 microns

Bottom- 6-10 microns

Yield Strength : 275 MPA and 550 MPA

Length : Any transportable length (site roll forming can be arranged)

Application : Cladding

 

                                   ROOF DECK

 

PRODUCT INFORMATION:  

PROFILE : Roof Deck has excellent performance capabilities under high wind load conditions.

BASE METAL : Cold Rolled Steel, annealed and tempered

AVAILABLE THICKNESS : 0.600mm / 0.50 mm

YIELD STRENGTH : 275 MPA ( 40,000 psi) per PNS 127:1988

TEMPER : Soft

NOMINAL WIDTH : 422mm

EFFECTIVE WIDTH : 406mm

ZINC COATING : 180gms. Per sq. mts. (triple spot test)

OTHER COATING : Oven baked epoxy primer with high grade polyester top and black coats.

Standard coat : Top 16-20 microns

Bottom : 6-10 microns

APPLICATION : Roofing and Siding

 

TOTAL ALLOWABLE LOADS IN LB. / SQ. FT.
PURLIN SPACING2’4”3’6”4’0”4.6”
                        : due to stress2’4”3’6”4’0”107
Gauge 0.60 mm : due to L / 360 deflection2’4”3’6”4’0”54
                        : due to L / 240 deflection2’4”3’6”4’0”81
     
PURLIN SPACING2’4”3’6”4’0”89
Gauge 0.50 mm : PURLIN SPACING2’4”3’6”4’0”45
                        : PURLIN SPACING2’4”3’6”4’0”68
     

 

 

                                    METAL DECK

 

 

 

The simplest and most reliable way of making solid-strong flooring since its specially profiled sheet can serve both as a permanent form and bottom reinforcing steel. It can be used efficiently in elevated highways, high-rise and multi-storey buildings, car parks, bridge deck, slabs, industrial buildings and residential units.

 

Maximum Unpropped Construction Spans
Base 
Metal 
Deck 
(mm)
Conc. 
Slab 
Thick 
(mm)

Structural Grade
Fy = 550 Mpa ( 80 Ksi)

Single Span (mm)
Two span (mm)
Three Span (mm)
0.80
100
3131
3991
3754
125
2865
3734
3512
150
2671
3501
3301
1.00
100
3357
4206
3956
125
3075
3938
3704
150
2869
3738
3516
1.20
100
3521
4387
4127
125
3257
4111
3867
150
3040
3904
3672

 

 

 

 


Facebook Like Button

Super Share

Share on Facebook

Google +1 Button